Dual Arm Camera Jibs

In the world of Camera Jibs, there are single arm, and dual arm. Dual arms will be able to hold a heavier weight, therefore allowing you to move heavier cameras. The CobraCrane Dual Arm jibs have all the same features as the single arm cranes. They will boom, swing, and tilt your camera. They are simple to set up and easy to transport (especially with the padded carry bags!)

The dual arm jib allows for the camera to tilt

The SteadyTracker Company manufactures steel and aluminum versions of the dual arm camera jibs.

Dual arm cranes: Bigger, Stronger, Larger Camera Capacities.

Various lengths to meet your needs and budget

CobraCrane 2 camera jib comes in 5 foot (CC2), 8 foot (CC2+EXT), 10 foot length (CC2PLUS), and a Heavy Duty unit (CC2HD) that can be both a 6 foot and a 10 foot length. The CobraCrane 2 camera jib systems are compatible with virtually all handheld camcorders, a wide variety of shoulder mount systems, most DSLR applications even those with full Rigs and large sized lenses. CobraCrane 2 camera jibs can handle cameras and rigs up to 9 kilos (20 lbs.). This weight is inclusive of batteries, lights, lenses and any other device mounted to the camcorder.

The 5 foot CobraCrane 2 Dual arm Camera Jib

CobraCrane 2X

Our most versatile dual bar camera crane. Designed with versatility in mind, the CobraCrane 2X camera jib can be configured either as a 5 foot crane or an 8 foot crane allowing for the flexibility of using just the right length for the job. With the ability to boom a camera weighing up to 20lbs, the CobraCrane 2X can reach up to 8 or 11 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance and versatility at a very competitive price.

The CobraCrane 2X is a 5 foot dual arm Camera Jib with a 3 foot extension

CobraCrane 2Plus

Our longest dual bar camera jib. With the ability to boom a camera weighing up to 20lbs, the CobraCrane 2 Plus camera jib can reach up to 12 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance at a very competitive price.  The CobraCrane 2Plus camera jib can be used as both a 10 foot and a 6 foot crane. You can change between the two in less then 10 minutes, so you have the right tool at the job for whatever you application.

The CobraCrane 2Plus is a 10 foot steel dual arm camera jib that booms, swings, and tilts your camera

CobraCrane 2HD

Our longest / strongest dual bar camera jib includes variable pivot points, so you can get your crane higher than other 10 foot cranes. With the ability to boom a camera weighing up to 25lbs, the CobraCrane 2HD camera jib can reach up to 13 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance at a very competitive price. This crane can be used as either a 10 foot or a 6 foot crane. Further our HD cranes have variable mounting points, so you can adjust how much crane is used to elevate the camera and how much can be used to set the counterweight. Built for modern three chip camcorders weighing up to 25lbs, the CobraCrane 2HD camera jib is a dual bar crane able to provide shots from an ant’s point of view all the way up to a Giraffe’s. Sweeping vista shots of landscapes, panoramas and sporting events have never been easier, or more dramatic.

The CobraCrane 2HD Steel Dual arm camera jib

---

FotoCrane 2 Lightweight dual arm Jib

The FotoCrane2 Dual arm Lightweight jib was created as a result of that customer feedback requesting a dual arm lightweight crane able to support a wide variety of DSLR and modern high performance cameras such as the new 4:3 systems as well as the exciting BlackMagic Cinema Cameras.

The lightweight and Retractable FotoCrane 2 Dual Arm Camera Jib

Telescopic Aluminum Tubes
The FotoCrane2 uses a three-part telescoping aluminum tube system. Both the weight bar section and the camera section telescope in and out of the chassis section allowing variable lengths from 111cm (46 inches) to 246cm (8 feet) so it can meet a wide range of applications. The weight bar can be adjusted allowing for easy and quick balancing and setup.

The FotoCrane 2 Lightweight Dual Arm jib is easy to mount on almost any tripod

The SteadyTracker Company also manufactures the CobraCrane 2HD ULTRALITE

Our dual arm CobraCrane UltraLite camera jib arm can reach up to 14 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance with both static and chain and sprocket controlled manual tilting. It weights about half the weight of most of our competitors cranes, yet offers additional features including manual and static tilt, variable pivot points, 8 and 12 foot lengths and simple release plate for quick release and easy operation.

The CobraCrane 2HD UltraLite is a lightweight heavy duty dual arm camera jib

Find the right jib for your project at http://www.cobracrane.com

The UltraLite Camera Jib

The BackPacker UltraLite is our most economical solution for filmmakers, hobbyists, and Professionals looking for small lightweight or second crane systems. The BackPacker UltraLite is an ideal solution for lighter cameras and since it works with lightweight low cost video tripods, it has a very low total cost of ownership. Full systems are available with tripods for under $500.

5 Foot UltraLite Camera Jib

The BackPacker UltraLite was created as a result of customer feedback requesting a super small, very lightweight, extremely affordable cinematography solution for weddings filmmaking, run-and-gun shooting and a wide variety of commercial applications.

Telescopic Aluminum Tubes

The BackPacker UltraLite uses a two-part telescoping aluminum tube system. The weight bar section telescopes in and out of the chassis section allowing variable lengths from 152cm (60 inches) to 100cm (3 feet) so it can meet a wide range of applications. The weight bar can be adjusted allowing for easy and quick balancing and setup.

Small and Easy to Transport

The BackPacker UltraLite weighs less than 2 kilos, making it easy to transport. With a retracted size of only 100 centimeters it’s also easy to store and can fit behind almost anything, so it does not take up a lot of room when you are transporting or storing.

Multiple Camera Mounts

Cameras can be mounted directly on the camera bracket via a slot for quick release, or via a wide variety of other mounts. A small tripod head can be mounted on the camera bracket and the camera mounted on the head. Small electric pan tilt heads are supported as well as our 501 release plate systems, allowing you to quick release using your 501 sliding plate. The BackPacker UltraLite also supports the Glif iPhone mount, allowing you to use your iPhone or iPad to shoot.

Manual or Static Tilting

You can lock the tilt in any position, so that it stays where you set it in relation to the movement of the boom, or you can manually tilt the camera benefiting from the drag of your fluid head causing the camera to tilt forward or back. You can even tilt while booming and you can do it very smoothly because when you tilt the handle you actually tilt the tripod head, so if you like tilting with lots of drag or just a little, you can easily select the drag at your leisure, meeting any shooting requirement.

Using the tripods fluid head, you can tilt the camera

The BackPacker UltraLite Camera jib can tilt the camera

Features: Compact size Telescopes down to only 100cm for easy transport. Easy to transport Easy to use in confined area. Lightweight Made of Lightweight Aluminum. Weight: 5kg Sets up quickly You are ready to get the shot and don’t have to waste time assembling your gear. Powdercoat finish Resists scratches, eliminates reflections. Multi function Boom, Swing, variety of tilting capabilities. Variable Length From 100 cm to 152cm, adapts to your needs Versatile mount Works on a very wide range of medium and heavy duty tripods. Smooth, Fluid Movement Benefits from drag of your fluid heads.

---

Shop Now and learn more about the CobraCrane BackPacker UltraLite Camera Jib.

The CobraCrane Camera Jibs: Features & Benefits

In the past those special shots that really made the movie were only done with large, heavy, expensive dolly and crane systems with teams of people to operate them. Now you can make the same moves, provide the same dramatic shots and make a more memorable event for a mere fraction of the cost. For over 20 years, CobraCrane camera jibs have been providing professionals with the freedom to radically express themselves, without blowing the whole budget. You’re limited only by your imagination.

There are 3 families of CobraCranes. The Specialized series, which includes the BackPacker series. Our CobraCrane 1 line features steel cranes, with aluminum extensions for cameras weighing up to 3 kilos. We offer lengths of 1.5meter, 2.64 meter and 3 meters. Finally our CobraCrane 2 family, features dual arm cranes for heavier cameras up to 9 kilos. These are also available in 1.5meter, 2.64 meter and 3 meters. All of the CobraCrane Camera Jibs have the same features and benefits

The CobraCrane Camera Jib will Boom, Swing, and Tilt your camera

Tilt: Fluid head on the tripod will allow for the camera to tilt. Our design provides mechanical connection between the tripod head and camera bracket, providing the smoothest tilting at the camera only, without the whole crane having to tilt.

Boom: Booming is completely free and the tilt can remain pointed at the subject or can be freely manipulated throughout the boom arc.

Swing: Swing benefits from the fluid drag of the tripod head.

Easy Set Up & Breakdown: Designed to be quick setup and breakdown. Simple items such as the the camera brackets have open slots to allow fast removal and replacement of cameras and camera accessories.

Light weight: All our systems can be transported, setup, operated and packed up by a single operator, thus eliminating the expenses of having a crew.

The CobraCrane BackPacker Camera Jib Arm

The CobraCrane BackPacker is a 5 foot single arm camera jib. The CobraCrane BackPacker Single Arm Camera Jib is our best selling item. This is one of the most cost effective and durable camera jibs we sell. Made with lightweight, yet durable rugged steel, this tool will boom, swing, and tilt your camera. This camera jib is simple to set up, and very easy to use. With the help of counterweights, your camera will feel like it’s floating. Get dreamy shots with this camera jib. There is also an option to add a 3 foot extension. The video below is a review of the CobraCrane BackPacker Camera Jib.